ASTM A871 Grade 60 is a high strength structural steel that shows improved atmospheric corrosion resistance. This low alloy ASTM A871 grade 60 steel plate material can form a protective rust like layer on the surface when exposed to weather elements. Thus, ASTM A871 grade 60 plates do not need additional coating.
Table of content
We are a premier ASTM A871 gr 60 steel plate supplier in India with years of expertise.
- Hot rolled ASTM A871 gr 60 structural steel plates are formed at high temperatures and then cooled naturally.
- The plates can undergo a normalization process to refine the grain structure and improve the mechanical properties. The process involves heating the plates above the critical temperature and then cooling them in still air.
- ASTM A871 gr. 60 plates can also be delivered in quenched and tempered (Q&T) condition. Herein, they are heat treated by quenching in a liquid medium and tempering to achieve the desired combination of high strength & toughness.
- They can be annealed to reduce internal stresses and improve machinability.
As a stockist, we deliver ASTM A871 gr 60 structural steel plate in Mumbai that has been reviewed and finished to specifications.
ASTM A871 grade 60 steel plate
A871 gr 60 structural steel plate
ASTM A871 gr. 60 plate
- Grade 65 is slightly stronger than Grade 60, as the former has min yield strength of 450 Mpa and for the latter, it is 415 MPa.
- While they have overall similar chemical composition, slight differences may exist between the two grades to achieve desired mechanical properties.
- ASTM A871 HSLA steel grade 60 plates is more widely available than grade 65 plates.
However, they both possess good weldability and are used for similar outdoor applications
We can quickly deliver A871-60 steel plate in Dubai as the oldest exporter in a variety of thicknesses, including 0.500 to 2.00 inch or bespoke.
| Thickness | Width | Length |
|---|---|---|
| 0.500 – 2 inch | 72- 120 inch | 120-1020 inch |
| Standard | Condition | Types |
| ASTM A871 | as rolled, normalized, Q & T | Type I, II, IV |
Request a quote for excellent and versatile ASTM A871 grade 60 mill plate for structural purposes right away.
ASTM A871 gr 60 temper leveled plate
- Width: 48″ to 120″
- Thickness: 3/16 to– 1 1/4″
- Length: upto 650″
A871-60 steel plate
- Temper Leveled plates
- Mill plates
- Coil for conversion to
ASTM A871 grade 60 mill plates
- Hot rolled
- Normalizing
- Q and T
Are you having difficulty obtaining an established stockholder of ASTM A871 gr 60 temper leveled plate who can supply immediately? You’re in the right place
| TYPE I | |
|---|---|
| VANADIUM | 0.02-0.10% |
| MANGANESE | 0.80-1.35% |
| CARBON | 0.19% MAX |
| PHOSPHORUS | 0.030% MAX |
| SILICON | 0.30-0.65% |
| SULFUR | 0.030% MAX |
| CHROMIUM | 0.40-0.70% |
| NICKEL | 0.40% MAX |
| COPPER | 0.25-0.40% |
| TYPE II | |
|---|---|
| MANGANESE | 0.75-1.35% |
| CARBON | 0.20% MAX |
| PHOSPHORUS | 0.030% MAX |
| SILICON | 0.15-0.50% |
| SULFUR | 0.030% MAX |
| NICKEL | 0.50% MAX |
| COPPER | 0.20-0.40% |
| CHROMIUM | 0.40-0.70% |
| VANADIUM | 0.01-0.10% |
| TYPE IV | |
|---|---|
| COLUMBIUM | 0.005-0.05% |
| MANGANESE | 0.50-1.20% |
| CARBON | 0.17% MAX |
| SULFUR | 0.030% MAX |
| PHOSPHORUS | 0.030% MAX |
| NICKEL | 0.40% MAX |
| SILICON | 0.25-0.50% |
| MOLYBDENUM | 0.10% MAX |
| CHROMIUM | 0.40-0.70% |
| COPPER | 0.30-0.50% |
| GRADE | PRODUCT TYPE | WIDTH (in) |
THICKNESS (in) |
LENGTH (in) |
|---|---|---|---|---|
| 60 | Temper Leveled plates | 48 – 96 | 0.138 – 0.500 | 72 – 720 |
| 60 | Mill plates | 72 – 120 | 0.500 – 2.00 | 120 – 1020 |
| — | Coil for Conversion To | 72 – 96 | 0.188 – 0.500 | — |
| GRADE | MINIMUM LONGITUDINAL AVERAGE ABSORBED ENERGY 1) (ft-lbs) |
THICKNESS (in) |
TEST TEMPERATURE (°F) |
|---|---|---|---|
| 60 | 15 | 0.138 – 0.500 | 0 |
| 60 | 15 | 0.501 – 2.00 | -20 |
| GRADE | TENSILE STRENGTH (KSI) | YIELD POINT (KSI) | MIN. 8” ELONGATION % |
|---|---|---|---|
| 60 | 75 | 60 | 16 |
How do you pick the ideal ASTM A871 gr 60 structural steel plate for your requirements?
- Determine the specific application and structural requirements of your project.
- Assess the required strength and toughness of the A871-60 steel plate based on the structural design and intended use.
- Understand if the corrosion resistance properties offered by the plate are at par with your project conditions.
- Decide the delivery condition of the given ASTM A871 gr 60 temper leveled plate based on the fabrication and construction needs.
- Select the appropriate plate thickness and consider the weldability & machinability of the material for ease of fabrication and installation.
- Ensure that the ASTM A871 Gr 60 plate meets relevant industry standards.
Which industries frequently utilize ASTM A871 gr. 60 plate?
Bridge & building constructions, outdoor structures, railways, industrial equipment, etc. are some of the top industries that use ASTM A871 type 60 plate.
What is the temperature range that ASTM A871 grade 60 mill plate may be used in?
The temperature range of the ASTM A871 grade 60 mill plate depends on the specific environmental conditions and the application requirements. ASTM A871 Grade 60 can withstand outdoor exposure and can be used in both cold and hot climates. Due to its resistant properties, it is suitable for applications in various weather conditions.
