A709 is a high strength structural steel with low alloy that is found in various structural applications. It is specified by the ASTM under the A709/A709M standard. ASTM A709 low-alloy steel plate offers excellent mechanical properties like high tensile strength and improved atmospheric corrosion resistance. The different grades of ASTM A709 high-strength steel plates material are classified as per their yield strength. The common ones are A709 grade 36, 50, 50W and 70W; wherein W represents enhanced weathering resistance.
Table of content
We are an authorised supplier of ASTM A709 plates in India.
The thickness of ASTM A709 plates can vary with the specific grade and application requirements. ASTM A709 standard specifies different grades with specific thickness ranges. The standard thicknesses for the plates range between 3/16 to 4 inches or thicker for certain applications.
As a stockist, specializing in delivering ASTM A709 HSLA steel plate to your precise specifications in Mumbai in compliance with standards.
ASTM A709 plate
A709 structural steel plate
ASTM A709 HSLA steel plate
ASTM A992 is used for structural steel shapes like wide flange beams. They have a min yield strength of 345 MPa and a min tensile strength of 450 MPa. A992 products have a higher strength to weight ratio than A709. This makes it suitable for building construction where weight saving is crucial. However, it lacks the enhanced atmospheric corrosion resistance found in A709.
A709 Steel plates materials are available in different grades with varying min yield and tensile strengths. It provides enhanced atmospheric corrosion resistance in Grade 50W and Grade 70W. Thus, they are suitable for bridge applications as it is exposed to outdoor environments.
As a trustworthy exporter, we provide reasonably priced a709 grade plate in Dubai in thickness ranging from 0.1875 to 3.00 inch and lengths ranging from 240 to 1200 inch.
| Thickness | Width | Length |
|---|---|---|
| 3/16 to 4″ | 48 to 120 “ | upto 480 “ |
| Process | Application | Grades |
| hot and cold rolled | pedestrian bridges, construction | Gr 36, 50, 50W, HPS 50W, HPS 70W |
We can deliver customized ASTM A709 structural steel plate with the highest standards and a superb finish; view the different types.
ASTM A709 low-alloy steel plate
- Grade 36
- Grade 50
- Grade 50W
A709 grade plate
- Width: : 72 to 120 inch
- Thickness: 0.1875 to 3.00 inch
- Length: 240 to 1200 inch
ASTM A709 high-strength steel plate
- Waterjet cutting
- Flame cutting
- Plasma & laser cutting
Supplying ASTM A709 high-strength low-alloy steel plate with Mill TC at the most affordable price, view their chemical, equivalent and mechanical property
| GRADE | THICKNESS | WIDTH | LENGTH |
|---|---|---|---|
| 50 | 3/16″ – 4″ | 48″ – 120″ | UP TO 480″ |
| 36 | 3/16″ – 4″ | 48″ – 120″ | UP TO 480″ |
| HPS 50W | 3/16″ – 4″ | 48″ – 120″ | UP TO 480″ |
| 50W | 3/16″ – 4″ | 48″ – 120″ | UP TO 480″ |
| HPS 70W | 3/16″ – 4″ | 48″ – 120″ | UP TO 480″ |
| GRADE | TENSILE STRENGTH (KSI) | YIELD POINT (KSI) | MIN. 8” ELONGATION % |
|---|---|---|---|
| 50 | 65 | 50 | 18 |
| 36 | 58-80 | 36 | 20 |
| HPS 50W | 70 | 50 | 18 |
| 50W | 70 | 50 | 18 |
| HPS 70W | 85-110 | 70 | 19 AT 2” ELONGATION % |
| NI | CU | P | S | MN | C | SI | CR | V |
|---|---|---|---|---|---|---|---|---|
| 0.40% Max | 0.25 – 0.40% | 0.030% Max | 0.030% Max | 0.80 – 1.25% | 0.19% Max | 0.30 – 0.65% | 0.40 – 0.65% | 0.02 – 0.10% |
- Pedestrian bridges
- Railroad bridges and overpasses
- Highway bridge girders and additional components
| WIDTH (INCHES) | GAUGE (INCHES) | LENGTH (INCHES) |
|---|---|---|
| 60/96/120 | 0.2500 | 240/480 |
| 96 | 0.1875 | 240/480 |
| 60/96/120 | 0.3750 | 240/480 |
| 0.3125 | 240/480 | |
| 0.6250 | 240/480 | |
| 0.5000 | 240/480 | |
| 0.8750 | 240/480 | |
| 0.7500 | 240/480 | |
| 96 | 4.0000 | 240 |
| 60/96/120 | 1.0000 | 240/480 |
| 1.2500 | 240/480 | |
| 1.1250 | 240/480 | |
| 1.7500 | 240/480 | |
| 1.5000 | 240/480 | |
| 2.0000 | 240/480 | |
| 96 | 2.5000 | 240/480 |
| 96 | 2.2500 | 240/480 |
| 96 | 3.0000 | 240/480 |
| 96 | 2.7500 | 240/480 |
| 96 | 3.5000 | 240 |
| 96 | 3.2500 | 240 |
| 96 | 3.7500 | 240 |
| Over 4″ Please Inquire |
What are the criteria for inspection and testing ASTM A709 plate ?
- Visual Inspection- A709 grade plates are visually examined for surface defects, cracks and other imperfections.
- Dimensional Check- To verify the dimensions as per the specified tolerances.
- Chemical Composition Analysis- To confirm that the plate’s chemical composition meets the required standards.
- Mechanical Properties Testing- To assess the plate’s mechanical strength and properties.
- Ultrasonic Testing- To detect internal defects and discontinuities.
What is the difference between A709 and A572 steel?
ASTM A709 HSLA steel plate material is a structural steel used in outdoor applications due to its enhanced corrosion resistance properties. ASTM A572 is used for general structural purposes. A709 comes in different grades with varying min yield and tensile strengths. A572 is also available in different grades but with specified min yield and tensile strengths.
What are the most popular uses ASTM A709 structural steel plate ?
ASTM A709 structural steel plate is ideal for various outdoor applications.
